Fengsheng wire equipment
classification center
+86-18607697148
Product details
The machine adopts fully automatic numerical control, delivers accurate lines, runs smoothly, and has low manic noise. It can achieve man-machine conversation. A machine can produce various hangers. A worker can manage 4-8 machines, which can save you enough manpower, production capacity is 20-45 minutes per minute, and the line diameter is 1.7 to 3.5.
Equipment specification
1. Electrical composition
1, the feeding mechanism of the automatic CNC hanger forming machine is controlled by 750W-2000W servo motor, which is characterized by fast feeding speed and high length accuracy.
2, the automatic numerical control hanger forming machine is made up of three phase 380V and 1.5KW motor, which is controlled by frequency converter to adjust the molding speed conveniently.
3, the operation of the automatic numerical control hanger forming machine can be operated automatically and manually by touching the human-machine interface and the operation buttons of the panel, respectively.
Two. Parameter setting
1. Through the "parameter adjustment" interface in the man-machine interface, "automatic feeding speed setting", 'each feeding length setting', 'inch moving feed speed setting' are carried out.
The A. automatic feeding speed setting function acts on the speed of feeding under the condition of automatic operation. The unit is mm/S (second).
B. the total length of each coat hanger in the automatic running state, and the feeding length of the "manual delivery" operation in the "production monitoring" interface. The unit is 0.1mm.
The C. feeding speed setting value acts on the feeding speed of the manual feeding operation in the production monitoring interface. The unit is mm/S (second). The speed of point feeding and point moving material in the production monitoring interface is 1/2 of the feeding speed.
1. Through the "system setting" interface in the man-machine interface, "feed speed time setting", '10mm corresponding pulse number', 'forming error number setting' are carried out.
A. "feed acceleration time setting", "10mm corresponding pulse number" for system tuning, customers need not master.
The function of B. 'forming error number setting' is that the system will alert the alarm and display the related alarm information when the number of the test is less than the number of automatic feed. When the value of the number of molding errors is 0, the system will not detect the molding error and block the alarm.
Three. Operation description
1, man-machine interface operation
A. point feed: the operation is not effective in the cycle operation; press this key, the servo motor of the feeding mechanism runs continuously, loosens the key, and the feed servo motor stops running.
B. point moving back material: the operation is not effective in the cycle operation; press this key, the back direction of the feed of the servo motor of the feeding mechanism runs continuously, loosens this key and the feed servo motor stops running.
C. manual delivery: the operation is not effective in the cycle operation; press this key 1 times, the feeding mechanism of the servo motor feed direction 1 times, duration of 1 clothes rack feed length set value.
D. stops buzzing: when the system fails, the human-machine interface displays relevant fault information, and the buzzer calls, pressing this key, the buzzer stops singing. After the failure is lifted, the fault information displayed on the man-machine interface is automatically cleared.
E. auto start: press this key to make the hanger forming machine enter the circulatory running state, and the system will continue to produce.
F. automatic stop: press this key, the hanger molding machine exit the cycle running state, the system is in the waiting state, at this time can carry on the need of the point moving feed, point move back material, manual feed, manual inch movement or automatic start operation.
G. total cleared: press this button to accumulate the number of production zero.
H. cleared at the moment: press this button, and the current output is cleared.
1, panel operation button
A. power indicator: when the main power is on, the control loop indicator lights up.
B. buzzer: when the system fails, the buzzer calls, the man-machine interface displays the fault content, and the buzzer will stop the buzzer when the "stop buzzing" key is pressed in the "production monitoring" of the man-machine interface.
C. speed regulation: it is used to regulate the output frequency of the inverter of the molding motor, so as to control the running speed of the molding motor.
D. emergency stop button: when the clothes rack machine is abnormal or urgent, press the emergency stop button, then the feeding mechanism and the molding mechanism stop acting.
E. manual inch movement: when the manual inch button is pressed, the molding mechanism motor operates at the frequency of 10.00Hz, and the forming mechanism is slow at this time, so it is easy to use when the product is tested or the mold is tested.
F. cycle start and stop: when pressing this key, the molding machine will enter the cycle running state; after pressing this key again, the molding machine will exit the cycle running state.
Four. Precautions
1, when the molding machine is in an electrified state, it is not allowed to turn the feeding servo motor compulsive, otherwise it will damage the servo controller. If you need to rotate the feed servo motor, please use the "point moving feed", 'point moving feed back', 'manual feeding' key in the man-machine interface "production monitoring".
2, please ensure that the machine is operated under the condition of ensuring the safety of the molding machine and the personal safety.
3, the machine power incoming line is three-phase five lines, it is three phase lines, one zero line and one grounding wire respectively. The line voltage is 380V, the phase voltage is 220V, the total power is about 3KW, and the grounding is reliable.
Five. The main advantages of the machine:
1. line length standard.
The 2. speed can be adjusted according to the line diameter, and the speed is fast and slow.
3., the output is fast and the fastest. It can produce 45 per minute.
4., the most convenient way is to change the mold (coat hanger style), which is convenient and simple, and the length of the wire needed to input the screen and the location of the mobile cutter.
5., the machine can be adapted to production: 201 stainless steel, 410 stainless steel and electricity.
1, when the molding machine is in an electrified state, it is not allowed to turn the feeding servo motor compulsive, otherwise it will damage the servo controller. If you need to rotate the feed servo motor, please use the "point moving feed", 'point moving feed back', 'manual feeding' key in the man-machine interface "production monitoring".
2, please ensure that the machine is operated under the condition of ensuring the safety of the molding machine and the personal safety.
3, the machine power incoming line is three-phase five lines, it is three phase lines, one zero line and one grounding wire respectively. The line voltage is 380V, the phase voltage is 220V, the total power is about 3KW, and the grounding is reliable.
Five. The main advantages of the machine:
1. line length standard.
The 2. speed can be adjusted according to the line diameter, and the speed is fast and slow.
3., the output is fast and the fastest. It can produce 45 per minute.
4., the most convenient way is to change the mold (coat hanger style), which is convenient and simple, and the length of the wire needed to input the screen and the location of the mobile cutter.
5., the machine can be adapted to production: 201 stainless steel, 410 stainless steel, electroplating line, common iron wire, rubber covered wire and aluminum wire.
Six. 4V fault processing parameters
PA11 is about 2500 larger, PA14 smaller than 1500, PA38 adjusted to 400..
Adjustment steps:
1. press MOD key, display SEF-P 2 times, press SET to display PA00..
2., through the middle two left shift keys, until the PA11 is displayed, press the SET key, press the middle two button to adjust the required value, and press the SET key.
After modifying the parameters, we need to keep the operation, and the electricity will continue. Press the MOD key until EEPOP is displayed, hold down the SET key until EE-O is released, and then save it.
