Fengsheng wire equipment
classification center
+86-18607697148
Product details
The machine adopts CNC control, the machine adopts full automatic control, the delivery line is accurate, the operation is stable, the manic tone is low, can realize man-machine dialogue, one machine can produce many kinds of clothes hanger. A worker can manage 4-8 machines, which can fully save you labor, the production capacity is 20-25 per minute, and the applicable line diameter is 1.7 ~ 3.5.
Equipment specification
I. electrical composition.
1. The feeding mechanism of fully automatic numerical control clothes rack molding machine adopts 750w-2000w servo-motor control, which is characterized by fast feeding speed and high precision of length.
2. The machine molding machine of fully automatic CNC garment frame adopts three-phase 380V and 1.5kw motor, which is controlled by frequency converter to facilitate the adjustment of molding speed.
3. Automatic operation and manual operation can be carried out by touching the man-machine interface and the operation button of the panel.
2. Parameter setting.
1. Through the "parameter adjustment" interface in the man-machine interface, the "automatic feeding speed setting", "each feeding length setting" and "inch moving feeding speed setting" are adopted.
A. The automatic feeding speed setting value is used for the speed of feeding. The unit is mm/S(second).
B. The length of each feeding length is set to the total length of each hanger. And the feed length of the 'manual feed' operation in the production monitoring interface. The unit is 0.1mm.
C. The setting value of the moving feed speed is applied to the feeding speed of the 'manual feeding' operation in the production monitoring interface. The unit is mm/S(second). In the 'production monitoring' interface, the speed of 'point moving feed' and 'point moving feed' is one half of the speed of the moving feed.
1. Through the "system setting" interface in the man-machine interface, the "feeding acceleration time setting", "10mm corresponding pulse number" and "forming error number setting" are adopted.
A. The "feeding acceleration time setting" and "10mm corresponding pulse number" are used for system debugging. The customer does not need to master it.
B. 'shape error number set is used when forming the amount less than the value more than the number of automatic feed' shape error number set value, the system will alarm prompt, man-machine interface display related alarm information. When the value of "forming error number setting" is 0, the system will not detect the forming error and block the alarm.
Operation instructions.
1. Man-machine interface operation.
A. Point feed: the operation is invalid in the loop operation; Press this key, the feeding mechanism's servo motor will continue to operate, release the key and the feeding servo motor will stop running.
B. The operation is invalid in the loop operation; Press this key, the feeding mechanism's servo motor will continue to run in the opposite direction, release the key, and the feeding servo motor will stop running.
C. Manual feeding: operation is invalid in circulation; Press this button once, and the feeding mechanism's servo motor will run for 1 time, and the duration will be set for the length of 1 coat hanger.
D. Stop buzzer: when the system fails, the man-machine interface displays the related fault information, the buzzer calls, press this key, and the buzzer stops chirping. After the fault is removed, the fault information displayed in the man-machine interface is automatically clearedThe fault information is automatically cleared.
E. Automatic start: press this button, the hanger machine enters the circulation state, the system continues to produce.
F. Automatically stop: press this button, the hanger machine exit cycle running state, the system is in a wait state, can be carried out at this time need inching inching back feeding, filling, manual feeding, manual start inching and automatic operation.
G. Cumulative clearance: press this button to count the number of production to zero.
H. Current clearance: press this button and the current output is zero.
1. Panel operation button.
A. Power instruction: when the main power supply is on, the control loop indicator is on.
B. Buzzer: when the system is faulty, buzzer, man-machine interface display content, when press the man-machine interface "' stop buzzer in production monitoring" key after, no matter whether the fault, buzzer will stop buzzer.
C. Speed adjustment: it is used to adjust the output frequency of the type motor frequency converter to control the running speed of the forming motor.
D. Emergency stop button: when the hanger machine is abnormal or emergency, press the emergency stop button, the feeding mechanism and the forming mechanism stop action.
E. Manual inch movement: after pressing the manual inch button, the forming mechanism motor runs at the frequency of 10.00Hz, and the forming mechanism is slow, which is convenient for product debugging or molding tool testing.
F. Cycle start and stop: when pressing this key, the forming machine enters the cycle operation state; Press this button again and the machine is out of circulation.
Iv. Matters needing attention.
1. When the molding machine is in a power state, it is not allowed to force the feeding servo motor, or it will damage the servo controller. If you need to turn the feeding servo motor, please use the 'point moving feed' and 'manual feeding' button in the man-machine interface 'production monitoring' to carry out the relevant operation.
2. Please operate the machine in the case of machine and personal safety.
3. The power supply of this machine is three-phase five-wire, with three phase lines, one zero line and one grounding line. The line voltage is 380V, the phase voltage is 220V, the total power is about 3KW, ensuring the grounding is reliable.
5. Main advantages of this machine:
1. Standard of delivery length.
2. The speed can be adjusted according to the line diameter.
3. The output is high and fast, and can produce 45 products per minute.
4. The most convenient is to change the mold (the style of the hanger) convenient and simple, input the required length of wire in the screen, and move the position of the cutter.
5. This machine can be used for production: 201 stainless steel, 410 stainless steel, electroplating line, ordinary iron wire, coated wire and aluminum wire.
